This DVDO 4K60 HDMI Extender Over HDBaseT Tx/Rx Set provides you with a transmitter and receiver that can extend your 4K HDMI signal up to 131' and an 1080p HDMI signal up to 230' over a single Cat 6 or better cable. It supports PoC (power over cable), RS-232 pass-through and guest-mode control. In addition, the transmitter has a USB 2.0 host and three USB 2.0 client ports, while the receiver supports two USB 2.0 clients. The receiver also allows for 4K to 1080p down sampling from its HDMI output port.
Specifications
- Compliant with HDMI 2.0b and HDCP 2.3, 18Gbps video bandwidth & HDBaseT 3.0
- Video resolution up to 4K2K@60Hz (YUV 4:4:4)
- Uncompressed video transmission up to 230ft/70m for 4K@30Hz & 1080p signals or 131ft/40m for 4K@60Hz signals over a single CAT6A/7 cable
- Tx includes 1 x HDMI and 1 x USB-C inputs, 1 x HDBT output, 1 x USB 2.0 host and 3 x USB 2.0 clients
- Rx includes 1 x HDMI output, 2x USB 2.0 clients
- USB-C and HDMI signal inputs support auto or manual switching mode
- Auto switching supports HDMI 5V or signal detect selection
- USB-C supports DP-ALT mode for A/V, USB 2.0 data and power charging up to 60 watts
- Tx/Rx USB-A client ports VBUS on or off depends on whether the USB host is connected
- HDR, HDR10, HDR10 , Dolby Vision LLM and HLG pass-through
- 4K to 1080p downscaling through HDMI output
- Both Tx and Rx support analog audio de-embedding
- RS-232 signal pass-through and guest-mode control
- Bi-directional IR pass-through, USB 2.0 signal transmission
- Advanced EDID management
- Each USB-A port provides power up to 5V/500mA
- Bi-directional 24V POC, with POC switch